GXP® PLUS 20P
Water reservoir for roofs and terraces
The membrane GXP® Plus 20 P is produced from high density polyethylene (HDPE), with the basis weight of 1000 g/m² . It is created especially for flat surfaces covered with vegetation. The membrane ensures unique properties when the buckets are directed with their apertures up, owing to which they play the role of micro-containers regulating the accumulation of water in the rooting system (in a plantcovered ground), and at the same time increasing the heat insulation of the system and limiting the heat accumulation.
Advantages
- High resistance to compression and puncture
- Simultaneous water accumulation and controlled drainage
- Increased heat insulation
- Limited accumulation of heat
- Cost-efficient
Technical Data
| Technical Data | |
|---|---|
| Weight | 1000 g/m2 |
| Material thickness | 1,0 mm |
| Compression strength | 200 kN/m2 |
| Embossing height | 20 mm |
| Number of emnbossings | 400 na m2 |
| Diameter of perforation apertures | 4,5 mm |
| Temperature resistance | -40 do +80oC |
| Air space between buckets | 14 l/m2 |
| Roll dimensions | 2,5 x 1,2 m |
| Water accumulation capacity | 6 l/m2 |
| Drainage capacity | 10 l/m/s |
Photos
For Download
909.87 KB |
pdf
ENG_GRILTEX_GXP_PLUS_20P
Housebuilding industry