GXP® PLUS 5+5
Insulation and protection of slopes and ditches
The membrane GXP® Plus 5+5, made from high density polyethylene (HDPE), owing to its structure of double embossings, ensures an increased friction angle of the ground on both sides. It is especially useful in areas with a high inclination angle, such as ditches, tanks, etc. and because of its two-side high ventilation capacity as an air gap between 2 concrete walls.
Advantages
- Increased friction angle of the ground on both sides
- High two-side ventilation capacity
- Increased compression and breakdown strength
- It enables a unifrom distribution of loads caused by ground pressure
Technical Data
| Technical Data | |
|---|---|
| Material | Pressed foil HDPE (high density polyethylene) |
| Roll width | 2,0 m i 4,0 m |
| Surface mass | 650-1000 g/m2 |
| Embossing height | 10 mm |
| Temperature resistance | -40 do +80oC |
| Drainage capacity (if it’s connected to the geotextiles) | 4,8 l/s/m | 288 l/min/m | 17 280 l/h/m |
Photos
For Download
1.42 MB |
pdf
ENG_GRILTEX_GXP_PLUS_5+5
Roads and motorways 
Railways 
Waste and landfills